点击图片查看原图
应用
低烟无卤阻燃聚烯烃热收缩标识套管是专为电线电缆标识而设计，由辐照交联低烟无卤阻燃聚烯烃材质制成，具有优异的电气性能、物理性能、化学性能和打印性能，可以方便地用标识打印直接打印，标识持久。不仅符合ROHS和REACH环保指令，而且符合IEC61249-2-21、欧盟2002/72/EC等环保标准的要求。
特性
v 收缩比：3:1，2:1
v 柔软、低烟无卤阻燃
v 可以方便打印
v 优异的打印性能，持久标识，符合SAE AS81531的打印标识要求
v 优异的电绝缘性能、物理性能和化学性能
v 符合ROHS、REACH环保规范
颜色
v 标准颜色：白色、黄色
v 其他颜色可定制
操作温度范围
v 连续使用温度范围：-55℃～125℃
v **起始收缩温度：70℃
v **完全收缩温度：110℃
符合标准
v SAE AS 81561,MIL-STD-202
v UL224 125℃ 600V
性能指标
|
性能 |
指标要求 |
测试方法 |
典型值 |
|
纵向收缩率 |
≤10％ |
ASTM D 2671 |
≤5％ |
|
抗张强度 |
10.4MPa min |
ASTM D 638 |
≥12MPa |
|
断裂伸长率 |
200％ min |
ASTM D 638 |
≥300％ |
|
老化后断裂伸长率 (热老化158℃,168小时) |
100％ min |
ASTM D 638 |
≥200％ |
|
热冲击
|
无裂纹 |
ASTM D 2671 |
无裂纹 |
|
低温柔软性 （-55℃，4小时） |
无裂纹 |
ASTM D 2671 |
无裂纹 |
|
绝缘耐压和击穿 |
2500V,60sec,不击穿 |
ASTM D 2671 |
不击穿 |
|
击穿强度 |
19.7 KV/mm min |
ASTM D 2671 |
≥20KV/mm |
|
体积电阻率 |
1014Ω•cm min |
ASTM D 876 |
≥1014Ω•cm |
|
腐蚀性 |
无腐蚀 |
ASTM D 2671 |
无腐蚀 |
|
阻燃性 |
1分钟内自熄 |
ASTM D 2671 |
通过 |
|
打印性能 |
50次橡皮擦，可辨认 30次来回擦，可辨认 |
SAE SA81531 MIL-STD-202 |
通过 |
|
抗液体 （23℃，24小时） |
打印吸识别 |
SAE AS81531 |
通过 |
规格尺寸
|
规格 |
收缩前（mm） |
完全收缩后(mm) |
适用线缆范围（mm） |
|
|
英制 |
公制 |
内径(min) |
内径(max) |
|
|
3:1 |
||||
|
3/32 |
Ф2.4 |
2.4 |
0.8 |
0.9~2.0 |
|
1/8 |
Ф3.2 |
3.2 |
1.1 |
1.1~2.7 |
|
3/16 |
Ф4.8 |
4.8 |
1.6 |
1.8~4.1 |
|
1/4 |
Ф6.4 |
6.4 |
2.1 |
2.3~8.1 |
|
3/8 |
Ф9.5 |
9.5 |
3.2 |
3.5~8.1 |
|
1/2 |
Ф12.7 |
12.7 |
4.2 |
4.6~10.8 |
|
3/4 |
Ф19.1 |
19.1 |
6.3 |
7.0~16.3 |
|
1 |
Ф25.4 |
25.4 |
8.5 |
9.3~21.6 |
|
2:1 |
||||
|
3/32 |
Ф2.4 |
2.4 |
1.2 |
1.3~2.3 |
|
1/8 |
Ф3.2 |
3.2 |
1.6 |
1.7~3.1 |
|
3/16 |
Ф4.8 |
4.8 |
2.4 |
2.5~4.7 |
|
1/4 |
Ф6.4 |
6.4 |
3.2 |
3.3~6.3 |
|
3/8 |
Ф9.5 |
9.5 |
4.8 |
4.9~9.0 |
|
1/2 |
Ф12.7 |
12.7 |
6.4 |
6.6~12.0 |
|
3/4 |
Ф19.1 |
19.1 |
9.5 |
10.0~18.5 |
|
1 |
Ф25.4 |
25.4 |
12.7 |
13.0~24.5 |
|
11/2 |
Ф38.1 |
38.1 |
19.1 |
21.0~37.0 |
|
2 |
Ф50.8 |
50.8 |
25.4 |
27.0~48.0 |
其他规格尺寸可定制
TMS125 Halogen Free Heat Shrinkable Polyolefin Identification Sleeve
Application
Special designed to meet the requiremwnts of identification of wire and cables. It is made of halogen-free flame retardant polyolefin with excellent electrical, physical, chemical and printing properties. It can be printed by market printed with permanent identification. TMS125 meets the requirement of ROHS, REACH, IEC61249-2-21 and EU2002/72/EC standards.
Characteristics
v Shrink ratio: 3:1, 2:1
v Flexible, Halogen-free flame-retardant.
v Easy to be print.
v Excellent printing property, permanent identification, SAE AS81531 applicable.
v Excellent electrical, physical, chemical and printing properties.
v ROHS and REACH compliant.
Color
v Standard color: White, yellow
v Other colors are available upon request.
Operating Temperature Range
v Operating temperature: -55℃～125℃
v Minimum shrink temperature: 70℃
v Minimum fully recovery temperature: 110℃
Approvals
v SAE AS 81561,MIL-STD-202
v UL224 125℃ 600V
Property
|
Property |
Requirement |
Test method |
Typical data |
|
Longitudinal shrinkage |
≤10％ |
ASTM D 2671 |
≤5％ |
|
Tensile strength |
10.4MPa min |
ASTM D 638 |
≥12MPa |
|
Elongation at break |
200％ min |
ASTM D 638 |
≥300％ |
|
Elongation after aging （158℃,168hrs） |
100％ min |
ASTM D 638 |
≥200％ |
|
Heat shock
|
No crack |
ASTM D 2671 |
No crack |
|
Low-temperature flexibility（-55℃,4hrs） |
No crack |
ASTM D 2671 |
No crack |
|
Dielectric voltage withstand |
2500V,60sec,no breakdown |
ASTM D 2671 |
No breakdown |
|
Dielectric strength |
19.7 KV/mm min |
ASTM D 2671 |
≥20KV/mm |
|
Volume resistivity |
1014Ω•cm min |
ASTM D 876 |
≥1014Ω•cm |
|
Corrosion |
No corrosion |
ASTM D 2671 |
No corrosion |
|
Flammability |
Self-extinguishing within one second |
ASTM D 2671 |
Pass |
|
Printing performance |
50rubs, legible 30strokes, legible |
SAE SA81531 MIL-STD-202 |
Pass |
|
Fluid resistance（23℃，24hrs） |
Printing legible |
SAE AS81531 |
Pass |
Sizes
|
Size |
As supplied (mm) |
After recovered(mm) |
Recommended use range （mm） |
|
|
inch |
mm |
Inside diameter(min) |
Inside diameter (max) |
|
|
3:1 |
||||
|
3/32 |
Ф2.4 |
2.4 |
0.8 |
0.9~2.0 |
|
1/8 |
Ф3.2 |
3.2 |
1.1 |
1.1~2.7 |
|
3/16 |
Ф4.8 |
4.8 |
1.6 |
1.8~4.1 |
|
1/4 |
Ф6.4 |
6.4 |
2.1 |
2.3~8.1 |
|
3/8 |
Ф9.5 |
9.5 |
3.2 |
3.5~8.1 |
|
1/2 |
Ф12.7 |
12.7 |
4.2 |
4.6~10.8 |
|
3/4 |
Ф19.1 |
19.1 |
6.3 |
7.0~16.3 |
|
1 |
Ф25.4 |
25.4 |
8.5 |
9.3~21.6 |
|
2:1 |
||||
|
3/32 |
Ф2.4 |
2.4 |
1.2 |
1.3~2.3 |
|
1/8 |
Ф3.2 |
3.2 |
1.6 |
1.7~3.1 |
|
3/16 |
Ф4.8 |
4.8 |
2.4 |
2.5~4.7 |
|
1/4 |
Ф6.4 |
6.4 |
3.2 |
3.3~6.3 |
|
3/8 |
Ф9.5 |
9.5 |
4.8 |
4.9~9.0 |
|
1/2 |
Ф12.7 |
12.7 |
6.4 |
6.6~12.0 |
|
3/4 |
Ф19.1 |
19.1 |
9.5 |
10.0~18.5 |
|
1 |
Ф25.4 |
25.4 |
12.7 |
13.0~24.5 |
|
11/2 |
Ф38.1 |
38.1 |
19.1 |
21.0~37.0 |
|
2 |
Ф50.8 |
50.8 |
25.4 |
27.0~48.0 |
Other sizes are available upon request.